Performance Data - Warn Industries 2.5ci Manual Del Usuario

Specifications
Part number: PN 64500 (CE version: PN 64501)
Rated line pull: 2500 lbs. (1134 kgs.) single-line
Motor: 12V DC, .9hp (.7kW) permanent magnet
Control: Handlebar mounted Mini-rocker switch
Geartrain: 3-Stage Planetary
Figure 1. WARN 2.5ci winch kit
Gear ratio: 136:1
Lubrication: Aeroshell #17
Clutch (freespooling): Cam activated
Brake: Dynamic. Mechanical brake is available
as an option. (CE version includes
mechanical brake).
Drum diameter/Length: 2.0"/2.9"
Weight: 15.4 lbs. (7.0kgs.)
Wire rope: 50', 3/16"diameter (15m, 5mm diam.)
Fairlead: Hawse
Recommended Battery: 12 Amp/hour minimum
for winching
Battery leads: 6 gauge
Duty Cycle: Intermittent
Finish: Grey

Performance Data

Line Pull
lbs (kgs)
0
500 (227)
1000 (455)
1500 (680)
Figure 2. Winch dimensions:
2000 (907)
12.62" L. x 4.5" D. x 4.75" H.
2500 (1134)
320mm L. x 12cm D. x 12cm H.
Above performance specs are based on first layer of drum
Pulling power
lbs (kgs)
2500 (1134)
2200 (998)
1930 (875)
1700 (771)
| Warn Industries, Inc.
2
Line Speed Motor Current
ft/min (m/min) Amps
24 (7.3) 18
19 (5.8) 51
15 (4.6) 88
11 (3.3) 125
9 (2.7) 165
7 (2.1) 204
Wire rope layer
1st is closest to drum
1st
2nd
3rd
4th
Step One: Safety First!
When installing your ATV winch system, read and
follow all mounting and safety instructions.
Always use caution when working with electricity
and remember to verify that no exposed electrical
connections exist before energizing your
winch circuit.
Figure 3: To install the complete kit, you will need to mount the winch, contactor
handlebar mounted Mini-rocker switch and remote socket (optional on the 2.5ci winch).
Mounting locations may vary depending on make and model of the ATV. Read and understand
the following instructions to choose the appropriate mounting locations.
WARN 2.5ci Winch Installation and Specification Guide |
3