Declaration Of Conformity - BOHELL SC400 Manual Del Usuario

cally for your appliance model.
- These supplies are available in specialist shops.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
- If the connection to the mains has been dam-
aged, it must be replaced, take the appliance to
an authorised technical support service. Do not
attempt to disassemble or repair the appliance
by yourself in order to avoid a hazard.
SPECIFICATIONS SC400
Rated power
Rated Voltage
No load speed
Wood cutting capacity
Steel cutting capacity
Aluminum cutting capacity
Slant up to
Weight
Sound pressure level
Sound Power level
Vibration
- NB: These specifications are subject to change
without notice of purpose of improvement.
- Measured sound level determined according EN
60745-1
- The vibration emission level given in this infor-
mation sheet has been measured according
EN 60745-1 and may be used to compare one
tool with other. It may be used for a preliminary
assessment of exposure
- The vibration value during actual use of the
power tool can differ from the declared total val-
ue depending on the way in which tool is used
- It's necessary identify safety measures to pro-
tect the operator that are based on an estima-
tion of exposure in the actual conditions of use
(taking account of all parts of the operating cy-
cle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
400W
220-240 V~
3000 rpm
55 mm
4 mm
8 mm
45º
1,37 Kg
L = 72 dB
PA
K = 3 dB
PA
L = 83 dB
WA
K = 3 dB
WA
5,85 m/s
2

DECLARATION OF CONFORMITY

- We hereby declare, under our own responsibil-
ity, that the BOHELL products described in this
manual SC400 comply with the following stan-
dards: EN 60745-1, EN 60745-2-3, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3 and
EN 62321 in accordance with EU Directives
2006/42/EC, 2014/30/EU and 2011/65/EU.
Signed
A. Martí i Vilana
Product engineering
Av. Barcelona s/n
Oliana, 21/03/2018
25790, Lleida SPAIN
This symbol means that user must
to consult safety warnings and
instructions thoroughly before use.
This symbol means warning or
caution.
This symbol means wear eye pro-
tection.
This symbol means wear ear pro-
tection.
This symbol means that tool is class
II
This symbol means that in case you
wish to dispose of the product once
its working life has ended, take it to
an authorised waste agent for the
selective collection of Waste from
Electric and Electronic Equipment
(WEEE).