Exploded View; Parts List - Promaker PRO-SD480 Manual Del Usuario

Fully tighten the screw by manually
rotating the screwdriver handle in a
clockwise direction (4).
MAINTENANCE
WARNING: When servicing, use
only identical replacement parts.
The use of any other part may create
a hazard or cause product damage.
DO NOT
use
cleaning plastic parts. Plastics are
susceptible to damage from various
types of commercial solvents and
may be damaged by their use. Use
a clean cloth to remove dirt, dust,
oil, grease etc.
WARNING: Do not allow brake
fluids, gasoline, petroleum-based
products, penetrating oils, etc. to
come into contact with plastic
parts. They contain chemicals
that can damage, weaken or
destroy plastic.
DO NOT abuse power tools. Abusive
practices can damage the tool and
the workpiece.
WARNING: DO NOT attempt to
modify tools
accessories. Any such alteration
or modification is misuse and
could result in a hazardous
condition leading to possible
serious injury. It will also void the
warranty.A WARNING: DO NOT
attempt to modify tools or create
accessories. Any such alteration
or modification is misuse and
could result in a hazardous
condition leading to possible
serious injury. It will also void the
warranty.
solvents when
or create
LUBRICATION
All of the bearings in this tool are
lubricated with a sufficient amount
of high-grade lubricant for the life
of the unit under normal conditions.
Therefore, no further lubrication is
required.

EXPLODED VIEW

PARTS LIST

WARNING: When servicing, use
only original equipment replacement
parts. The use of any other parts
may create a safety hazard or cause
damage to the screwdriver.
Any attempt to repair or replace
electrical parts on this screwdriver
may create a safety hazard unless
repairs are performed by a qualified
technician.
# Part Name
1 Retaining ring
2 Output shaft
3 Self lubricating bear-
4 Gear housing
5 Clamping plate
6
7 Positioning ring
8 Rinq qear
9 Driving block
10 Powdered metal plan-
etary qear
11 Planetary carrier
Qty.
ing
Pin
1
1
1
1
1
6
1
1
1
3
1
12