Bissell 1887 Serie Manual Del Usuario página 10

Operations
*Cleaning with Deep Reach™ Tool
*This tool is NOT included with the machine but is
available for purchase on BISSELL.com. Please read
instructions for use if you've purchased this tool.
1. Set tool on soiled surfaces and press the
trigger to spray solution onto the soiled
area to be cleaned.
2. Slowly move the tool back and forth
over the soiled surface, keeping the tool
in contact with the carpet.
3. Release trigger and move tool slowly over
the soiled area to suction up water and dirt.
4. Continue to clean the area, working in small
sections, until no more dirt can be removed.
*Hard Floor Cleaning
*This tool is NOT included with the machine but is
available for purchase on BISSELL.com. Please read
instructions for use if you've purchased this tool.
Your deep cleaner is compatible with a hard
floor tool from bissell.com, part number 160-1523
and 2X Hard Floor Solutions Formula. These
products are available for purchase by contact-
ing the BISSELL Consumer Care department by
phone or at the website. The hard floor tool pro-
vides effective cleaning for linoleum, vinyl, and
tile floors.
Caution: Do not use on unsealed hardwood
floors.
1. Thoroughly vacuum or sweep floor to pick up
any debris.
NOTE: Prior to filling with formula and water be
sure all carpet cleaning formula is thoroughly
rinsed from tank.
2. Fill the bladder with clean hot tap water
(140°F/60°C MAX) and set aside. Do not boil or
microwave water.
3. Fill BISSELL 2X Hard Floor Solutions Formula
to the indicated fill line in the provided measur-
ing cup (2.5 fl oz) and pour into mouth of
bladder. Set tank aside until after hard floor
tool is installed.
4. Press the Recline Pedal and allow the handle
to rest on the floor. Lift machine base so that
underside is easily accessible, then attach the
hard floor tool to the bottom of the machine by
hooking it into the nozzle and swinging it down
until it clicks into place.
10
www.BISSELL.com
1
3
4
WARNING
To reduce the risk of fire and electric shock when
cleaning a hard floor, the BISSELL hard floor tool
160-1523 must be used and it must only be used
with BISSELL 2X Hard Floor Solutions cleaning fluid
intended for use with this appliance.