Publicidad
Enlaces rápidos
25˚
4x
M4 x 10mm
4x
M4 x 10mm
4x
M4 x 25mm
4x
888-33-312-W-00 rev. B • 09/10
5"
(127mm)
1x
5-sided wrench
llave pentagonal
Clef Allen
1x
Inbusschlüssel
5-kantige sleutel
Chiave a 5 lati
1x
5 角レンチ
5角扳手
5면 렌치
1x
3x
HP Integrated Work Center (SFF)
Weight Capacity:
360˚
CPU size:
(178-356 mm)
2x
Manuel de l'utilisateur
Weight Capacity
for Display:
6 -16 lbs
(2.7 - 7.2 kg)
Total Maximum Weight
Capacity for Stand:
(includes display, CPU,
keyboard and mouse)
7" -14" H
2"-4.5" D
7" -15" W
(50.8-114 mm)
(178-381 mm)
637656-B22
User's Guide
Guía del usuario
Benutzerhandbuch
Gebruikersgids
Guida per l'utente
ユーザーガイド
用户指南
사용자 안내서
37 lbs
(16.7 kg)
1 of 7
Publicidad
Manuales relacionados para HP Integrated Work Center
Resumen de contenidos para HP Integrated Work Center
- Página 1 HP Integrated Work Center (SFF) User's Guide Guía del usuario Manuel de l’utilisateur Benutzerhandbuch Gebruikersgids Guida per l’utente ユーザーガイド 用户指南 사용자 안내서 Weight Capacity: 25˚ Weight Capacity 5" for Display: (127mm) 6 -16 lbs (2.7 - 7.2 kg) Total Maximum Weight 360˚...
- Página 2 Knipperen - Knipper regelmatig om droge ogen te vermijden. 的知识，请访问： Pauzes nemen • 2 tot 3 minuten elke 20 minuten www.hp.com/ergo • 15 tot 20 minuten elke 2 uur. Altezza Posizionare la parte superiore dello schermo leggermente sotto il livello degli occhi.
- Página 3 0˚ 75x75mm 75x75mm 100x100mm 100x100mm M4 x 25mm M4 x 10mm M4 x 10mm 888-33-312-W-00 rev. B • 09/10 3 of 7...
- Página 4 It is important that you adjust this product according to the weight of the mounted equipment as described in the following steps. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation. Adjustments should move smoothly and easily through the full range of motion and stay where you set it.
- Página 5 M3 x 10mm 888-33-312-W-00 rev. B • 09/10 5 of 7...
- Página 6 CPU size: 2"- 3" (50.8 - 76 mm) IMPORTANT! Equipment is not secure until fasteners are tightened as shown in Step 7d. 5-sided wrench llave pentagonal CAUTION: DO NOT overtighten fasteners. Overtightening may cause damage to your Clef Allen equipment. Inbusschlüssel Cuidado:: No sobreapriete los tornilllos, pues podría causar un daño al equipo.
- Página 7 Optional Desk Attachment Two M4 threaded screw inserts are located at the bottom of the base to allow for attachment of the stand to worksurface. Screws not supplied. 360˚ 4.5" (114.3mm) Removal Steps 5-sided wrench llave pentagonal Clef Allen Inbusschlüssel 5-kantige sleutel Chiave a 5 lati 5 角レンチ...