Installation Of Anti-Tilt Support; Connection To Electricity Network - Brandy Best CVE50IX Instrucciones De Uso

CAUTION: Avoid installing the oven close to combustible materials (e.g. curtains, towels, etc.)
CAUTION: Before connecting your appliance, fully uncoil the power cable.
The appliance must be positioned leaving the socket accessible at any time.
Do not run cables behind or close to the heating sections of the appliance, or through holes or covered
sections which could sever or damage the cables.
Ensure that the oven racks are inserted correctly.

Installation of anti-tilt support

CAUTION: In order to avoid the oven falling over, you must install the anti-tilt support to fix the product in
place.
This support (fig. 2) is fixed to the floor with the parts provided. Fig. 3 shows the optimal position for
installation.
Following installation of the support, push the oven into
place until the rear right stand is completely inserted, as
shown in fig. 4.

Connection to electricity network

This appliance is not supplied with a power cable or plug; accordingly you must install an appropriate
plug in order for the oven to function.
Page 8