Special Features; Front View; Back View - Bissell SPOTBOT 2114 Serie Guia Del Usuario

Special Features

Front view

4 - Preset Cleaning Cycles Control PaneI
4
Located on top of the unit, you will find the
control panel. Select the cleaning cycle you
would like to use (detailed instructions on
page 9). The "Power" and "Done" are not
buttons; "Power" is an indicator light to tell
you when the SpotBot® is "ON". "Done" is an
indicator light to tell you when the cleaning
cycle is done.
7 - Spray Trigger
Press the Spray Trigger to release water and
formula onto the area to be cleaned. (Only use
in hose/tool mode)
10 - Vacuum Flex Hose
Wraps around the center of the unit, and serves
as the travel path for dirty water and formula
7
suctioned into the Dirty Water Tank.
The hose can also be unwrapped and used with
the Tough Stain Tool for manual cleaning in hose/
tool mode.

Back view

12 - Tough Stain Tool Storage
Stored on board for your convenience.
13 - Cleaning window
Provides an area to see the hands-free
cleaning action.
10
NOTE: Unwrap Power Cord
completely before operating the unit.
Underside view
14 - Scrubbing Brushes
Automatically spray, brush and remove both
surface and tough stains and odors.
15 - Suction Nozzles
Provides suction path when using the
hands-free cleaning cycles.
14
15
12
13
5
www.BISSELL.com