Getting Started - Bissell SPOTBOT 2114 Serie Guia Del Usuario

Ocultar thumbs Ver también para SPOTBOT 2114 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting Started

Important! Please check manufacturer's tag before cleaning area rugs for any
specialized cleaning instructions. Not for use on silk or delicate area rugs.
Before using, test a small
1
inconspicuous area for
colorfastness.
Hands-Free Cleaning
1
Place the unit directly over the spot or
stain, making sure the stain is in the center
of the cleaning area.
3
When the cleaning cycle you have
selected is complete, the Done light will
illuminate and the machine will sound a
series of "beeps". Press the STOP button
to turn the machine OFF. The machine
will not beep when turned OFF
NOTICE: To prevent damage to Berber carpets, avoid repeated cleaning cycles in
the same area.
Select "Hose/Tool" and follow
2
manual cleaning instructions on
page 10 to test.
2
Select which cleaning cycle (Quick Clean
or Deep Clean) you would like to use.
SpotBot® will begin spraying, brushing
and suctioning the soiled area, in a pre-
programmed cycle. Both cycles have been
tested and proven to deliver superior
cleaning results, taking the guesswork and
effort out of cleaning for you.
4
Pick up the unit and check the area that
was cleaned.
If you use BISSELL® Oxy Boost, it will
continue to work for the next six to eight
hours, cleaning your spots and stains all
the way to the backing of the carpet.
www.BISSELL.com
9

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Spotbot 2117 serie

Tabla de contenido