Filling The Tank - Bissell SPOTBOT 2114 Serie Guia Del Usuario

Filling Your Clean Water Tank:
Portable Machine Formula (2X Concentrated)
1
To fill the clean water/solution tank,
remove the clean water tank by lifting it
straight up and then away from the unit.
3
1
1) Add hot tap water to water fill line.
2) Add formula by following the indicated
"formula" fill line on your clean tank
A few notes about filling the clean water tank:
• Fill with hot (140°F/60°C MAX) tap water and add the
appropriate BISSELL solution.
• Fill with formula to the fill line as indicated.
DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE.
2
Pour in more power with BISSELL Boosts
• Fill tank with water and 2X formula (Step 3 above).
• Add 1 ounce of any BISSELL Boost.
2
Unscrew the black cap at the bottom of
the clean water tank.
4
Twist the cap back into place and set tank
back on unit.
www.BISSELL.com
7