Emptying The Dirty Water Tank - Bissell BarkBath QT 2290 Serie Manual De Instrucciones

Emptying the Dirty Water Tank

WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical
outlet before performing maintenance or troubleshooting.
1
Turn power switch to the OFF (O) position
and unplug power cord from outlet.
3
Empty and rinse the dirty/collection tank
after each use, OR when dirty water
reaches the indicated maximum fill line.
2
Lift up the dirty water tank lever and
pull up to remove the tank from the unit.
Carry the tank upright to avoid spilling
before emptying.
4
Place tank back in unit, and press down
on tank lever to lock it in place.
www.BISSELL.com
11