Setting Alarm Clock; Secret Code Setting And Remote Monitor Function - Microsonic TEL6019 Manual Del Usuario

key continuously to adjust the LCD contrast.
Setting Flash time
1. In on-hook state, pressSET key and press UP/+ key three times, LCD display SET 4 FLASH, and press
SET key again, LCD displays FLASH 300
2. Press UP/ or DOWN/+key to edit the flash time to 100, 300, 600 or 1000ms.
3. Press SET to confirm
Note: press DELto quit, and return to the on hook state.

7. Setting Alarm Clock

1. In on-hook state, press ALARM key once, LCD displays 12-00 AL1,
2. Press UP/+ or DOWN/- key to select ON or OFF. LCD displays "ALM" icon when the alarm is set to ON.
3. Press SET key, value "12" starts to flash.
4. Press UP/+ or DOWN/- key to set the alarm hour and press SET key to confirm and enter alarm minute
setting.
5. Press UP/+ or DOWN/- key to edit alarm minute and press SET key to confirm and go to next group alarm
clock setting.
6. Repeat the above steps to set additional alarms.
Note: The first 3 groups alarm clock will be repeated periodically every day while the last 2 groups alarm clock
is effected one time.

SECRET CODE SETTING AND REMOTE MONITOR FUNCTION

8. Setting
1. In on-hook state, press and hold RING key for 3 seconds, LCD displays Pin ----.
2. Input a 4-digit of PIN using the numeric keys.
3. PressDEL to edit the secret code, press SET to confirm.
4. When the last digit of the secret code is #, the telephone will activate remote monitor function.
5. Set the ringer to OFF. (Please refer to section "SETTING RINGING TONE").
9. Usage
1. Secret code: When caller calls this telephone, he/she will hear the usual ringing tone (when the line gets
through) three times or four times. However, the telephone unit will not ring. The caller will hear a short "di"
sound, which means that the caller need to key in the secret code. Once the caller keys in the correct code,
the telephone unit will ring. Press
2. Remote monitor: If the last digit of the secret code is #, after the caller keys in the correct secret code, the
telephone unit will go into hands free mode automatically.
3. If the caller keys in the wrong code, he/she will have to call again and key in the correct secret code PIN.
Note: This function is useful only when the telephone ringer is set to OFF. The caller must know the secret
code in order to dial through the line.
key or pick up the handset to have the conversation with the caller.
20