ARVA NEO+ Guía De Utilización página 9

1. Lower your device to near snow level
2. Move your device in a cross pattern to
locate the point where the distance reading
is the lowest
It is then much quicker to start probing once
you have defined the probable burial zone
within a less than one-meter range
MULTIPLE VICTIMS INDICATED
Victims appears on the left part of your screen.
When a victim is marked a flag appears close to
it. The + indicate that there is 4 or more victims.
Example of fine search
technique
1st probing
point
MARKING
When within 3 (or 5) meters of
a victim the flag icon will Flash
A
in the upper right corner of the
screen. Pressing the center
B
button will mark this
signal. The transceiver then searches for the next
closest signal, without returning to a marked victim.
AUTOMATIC RETURN TO TRANSMIT MODE
When probing/shoveling, you do not want your beacon to
switch back to transmit mode and interrupt searches for
other buried victims. This is why the new NEO+ holster
allows you to wear your device in search mode when
probing.
In the event of a secondary avalanche, your device will
automatically switch back into transmit mode. The
default setting for the NEO+ is to revert to transmit mode
after 4 minutes without movement.
After 4 minutes without detecting any movement, an
alarm will sound and you will be asked to press on the
marking button on your device to confirm that you are
not buried. If no action is taken, the device will return to
transmit mode.
EN