Basic Setup; Stage Fill; With A Loudspeaker - Bose Professional AMS115 Guía Del Producto

Basic Setup

Stage Fill

WARNING: Make sure the stage or floor is
stable and level.
WARNING: Do not allow the subwoofer to
protrude over the edge of a stage. Make
sure the entire subwoofer is resting on the
stage.
WARNING: Do not create a stack of more
than two subwoofers.
WARNING: Do not use a pole mount with a
stack of subwoofers.

With a Loudspeaker

WARNING: Make sure the subwoofer is placed on a stable, level surface.
WARNING: Refer to all relevant documentation for the loudspeaker and pole before attaching them to the
subwoofer. Make sure the subwoofer can support the weight of the loudspeaker and pole. Once the subwoofer
and pole are assembled and the loudspeaker is attached, make sure the whole assembly is stable and does not
present a tipping or falling hazard.
WARNING: Do not attempt to move the whole assembly. Remove the loudspeaker from the pole before moving
the subwoofer.
WARNING: Do not use a pole mount with a stack of subwoofers.
M20 pole mount
4 • English
PRO.BOSE.COM
Bose AMS115 • Product Guide