Technical Data - Black+Decker BSL150 Manual De Instrucciones

Reflector led recargable
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
The spotlight is ideal for security, outdoor, camping fishing,
night game drives, mining, industrial and general use. LED
globes are shockproof and never need replacing. The casing
is durable and lightweight therefore easy to carry and point
wherever it is needed.
MAINTENANCE
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning. Your charger does not
require any maintenance apart from regular cleaning.

WARNING: To reduce the risk of serious personal
injury, turn off the tool and disconnect it from
the power source before making adjustments or
removing / installing devices or accessories. An
accidental start could cause injuries.

¡Important! To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified organizations, always using identical
replacement parts. Unit contains no user service able
parts inside.
CLEANING

WARNING: Blow dirt and dust from all ventilation
ducts with dry air, at least once a week. To reduce
the risk of injury, always use ansi z87.1 Approved eye
protection when performing this task.

WARNING: Never use solvents or other abrasive
chemicals to clean non-metallic parts of the tool. These
chemicals can weaken the plastic materials used in these
parts. Use a cloth dampened only with water and neutral
soap. Never allow liquid to penetrate inside the tool or
immerse any of the parts in a liquid.
ACCESSORIES
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.

WARNING! The use of any accessory not recommended
for use with this tool could be hazardous.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
16
household, at municipal waste sites or by the retailer when
you purchase a new product.
BATTERIES
BLACK+DECKER batteries can be recharged many
times. At the end of their useful life, discard
batteries with due care for our environment:
Run the battery down completely, then remove it from
the tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take
them to any authorized repair agent or a local recycling
station.
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest you, or visit us at www.blackanddecker-la.com

TECHNICAL DATA

LED SPOTLIGHT
Lumen
1 Top LED
(W)
Weight
lbs (kg)
Charging cable
connection
CHARGER (adaptor)
TYPE
Input voltage
V
Frequency
Hz
Output
voltage
Current
mA
Charge time
hr
BATTERY
Voltage
Capacity
Ah
Running time
hr
Type of battery
BSL150
150 (3)
0.62 (0.33)
With AC adaptor
and 12V car adaptor
AR
B3
B2
BR
220
120
220 127/220
50
60
50/60
6 V
500
4 - 6
3.7 V
1.8
High: 2
Low: 4
Lithium Ion Integrated
60

Publicidad

Tabla de contenido
loading

Tabla de contenido