Charging The Battery; Steps For Cleaning Grill; Before Use - Grillbot GBU101 Manual De Instrucciones

Charging the battery

• Open the cover of the charging connector the top of
the product..
• Connect firstly adapter plug into the jack on the top
of the product, and then plug the adapter into an
electrical outlet as shown. LCD display lights and cells
on the battery icon flashes.
• When the battery is fully charged, the battery icon
appears with 4 cells. Grillbot beeps for 10 seconds.

Steps for cleaning grill

Before use

After a full 4 hour charge your Grillbot is ready to do the dirty work.
First things first, be cool. Grill temperature must be below 95 °C.
Gas grills T
Charcoal grills
WARNING! Grillbot will work on a cold or hot grill. The built in heat sensor will
alert you if the grill is TOO HOT . Failure to allow for proper cooling may result
in product damage or burn injury.
iMPORTANT! Before every use inspect Grillbot brushes for shedding bristles
or loose wires. Always inspect brushes prior to and after using Grillbot and
replace immediately if brushes or brush bristles are missing or appear to be
loose. Brushes should be cleaned regularly.
Use on a level surface.
Bristles from the brushes can disengage and may cause choking
or ingesting injury. Always inspect your grill for loose
Turn off flame, open lid and allow to cool at
least 5 minutes before running Grillbot.
Allow flame to die down, open lid and allow to
cool for at least 20 minutes or longer.
bristles before cooking.
30