Bimar DEU315 Folleto De Instrucciones página 51

• If tank drainage is in use, check that the continuous drainage spout is tightly sealed
with its rubber cap each time the appliance is turned on.
• If continuous drainage is on, make sure that the drainage tube is properly
connected to the spout, that the opposite end is lower than the spout, and that the
incline is even, so that the water flows internally without any obstructions.
• Caution: do not cover the appliance to avoid overheating.
• The appliance does not require installation, i.e. preparation of electrical
attachments/water connection /fixtures or other installations, before use.
• Before each use, check that the appliance is in good condition and ensure that the
power cable is not damaged.
DESCRIPTION
dehumidifier
Wi-Fi
operating systems.
•
Electronics with integrated Wi-Fi allowing the Smartphone-device communication via
an App.
•
All functions can be set-up using the App. Stand-by/I switch, Mode: Purifier /
Dehumidifier with settings for Normal / Continuous / Turbo / Drying, Min / Max Fan,
humidity settings (30% to 80% RH), daily and weekly programming, Sleep function, LED
display with deactivation, and keypad Lock/Unlock.
•
Check that the router is for domestic use, that there are no access restrictions except
the password, that the Wi-Fi network is 2.4 GHz, and that there is a strong, uniform Wi-
Fi signal in the room where the device is to be installed.
•
Make sure that the smartphone is connected to the wi-fi network to be used for the
appliance.
First Installation/Setup
1.1 Install the "BIMAR life Smart" App via Google Play (Android) or AppStore (iOS), or
scan the QR code provided here.
For Android
1.7 Once installed, the app icon appears. Click the "Bimar
Live Smart" icon to run the app.
1.8 The first time the app is started, register and enter your credentials:
- click "Register" and confirm the "Privacy Policy Statement" with "I agree" to continue
that can be used with an App on a Smartphone with Android or iOS
For iOS