Trouble Shooting - EAS ELECTRIC EMF173NF Manual De Instrucciones

REPLACING THE LED LIGHT
Warning: The LED light must not be replaced by
the user! if the LED light is damaged, contact the
customer helping for assistance. To replace the
LED light, the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand while
pressing the connector latch.

TROUBLE SHOOTING:

lf you experience a problem with your appliance
or are concerned that the appliance is not
functioning correctly, you can carry out some
easy checks before calling for service,please
see below. You can carry out sorne easy
checks according to this section before calling
for service.
Warning! Don't try to repair the appliance
yourself. lf theproblem persists after you have
made the checks mentioned below, contact a
qualified electrician,
engineer or the shop where you purchased the
product.
authorized
20
service
V.2