Introduction; System Requirements; Installing Default Drivers - Targus PAKP004E Manual Del Usuario

TARGUS USB MINI KEYPAD
WITH 2-PORT HUB

Introduction

Congratulations on your purchase of the Targus USB Mini
Keypad with 2-Port Hub. This user's guide describes how
to connect the keypad to your computer and install default
software drivers.

System Requirements

To use the keypad your computer must meet the following
hardware requirements and run one of the operating
systems listed below.
Hardware
• PC with an Intel
• USB 1.1 or 2.0 interface
Operating System
• Windows

Installing Default Drivers

1 Turn off your computer.
2 Plug the USB connector into an available USB port on
your computer.
3 Turn on your computer.
Your computer's operating system identifies the keypad
and begins installing the default driver. Follow any on-
screen procedures to complete the default driver
installation.
®
Pentium
®
98/Me/2000/XP
®
processor or equivalent
4