Freezer Drawers; Refrigerator Care; Cleaning; General Use Information - Hisense HQD20 Serie Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: The quality of your ice will be only as
good as the quality of the water supplied to
your ice maker. Avoid connecting the ice maker
to a softened water supply. Water softener
chemicals (such as salt) can damage parts of
the ice maker and lead to poor quality ice. If
a softened water supply cannot be avoided,
make sure the water softener is operating
properly and is well-maintained.

Freezer Drawers

To Remove/Replace Freezer Drawer:
1. Pull out drawer to maximum extension.
2. Lift up to remove the drawer.
3. Reverse steps 1 and 2 to replace the drawer.

Refrigerator Care

Cleaning

Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about
once a month to avoid buildup of odors. Wipe
up spills immediately. To avoid odor transfer and
drying out of food, wrap or cover foods tightly.
WARNING
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion or fire.
IMPORTANT:
Do not use harsh chemicals, ammonia, chlorine
bleach, concentrated detergent, solvents,
abrasives or metal scouring pads to clean your
refrigerator inside or out. They can damage
and/or discolor the refrigerator finish.
Do not use warm water to clean glass shelves
while they are still cold. Glass may break when
exposed to sudden temperature changes or
impact.
12

General Use Information

When first turning on refrigerator after a period
of non-use, allow the refrigerator to cool at
least 2 hours before adding food.
Do not block air circulation vents with stored
items.
Store items so that the air can circulate freely
around them.
Cover or wrap stored food well to avoid
transfer of odors.
Once defrosted, food quality will deteriorate
rapidly. Defrosted food should not be refrozen.
Neither bottled nor canned drinks should be
stored in the freezer compartment. Bottles and
cans may explode.
WARNING
Electrical Shock Hazard
Unplug your appliance or disconnect power before
cleaning.
Failure to do so can result in death, electric shock or
personal injury.
1. Unplug refrigerator or disconnect power.
2. Clean the interior.
Hand wash, rinse, and dry removable parts
and interior surfaces thoroughly. Use a clean
sponge or soft cloth and a mild detergent in
warm water.
3. Clean the door seals (gaskets). A dirty or sticky
door seal may adhere to the cabinet and tear
when you open the door.
Using a soft cloth and a solution of mild
detergent and warm water, hand wash the
door seals. Rinse with clear water and dry
thoroughly.
4. Clean the exterior surfaces.
Wash exterior surfaces with a clean, soft cloth
or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry
immediately to avoid water spots.
5. Plug in refrigerator or reconnect power.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido