Tabla De Contenido; Introduction - Bell INFLATION STATION 500 Instrucciones Para Su Uso

Introduction _________________________________________________________________ 2
Featured Product Illustrations ________________________________________________ 3
General Safety Rules and Warnings ___________________________________________ 4
Inflator Operation ___________________________________________________________ 5
_______________________________________________________________ 5
Inflating Tires
Inflating sports balls or other high pressure small inflatables
_________________________________________________________________ 6
Work Light
Maintenance ________________________________________________________________ 6
Trouble Shooting ____________________________________________________________ 7
Notes _______________________________________________________________________ 7
Warranty ____________________________________________________________________ 8
Contact Us __________________________________________________________________ 8
Your new inflator provides up to 50 PSI and must be connected to a 15 amp 12 Volt DC
power outlet. The INFLATION STATION™ 500 includes a high pressure inflator for vehicle
tires and sports balls. This model also includes a LED work light.
INSPECT INFLATOR AFTER UNPACKING
After unpacking your inflator, carefully inspect the inflator to ensure there is no
damage that may have occurred during transit and verify all components have been
included as listed and shown on page 3.
IMPORTANT! READ ALL INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO
USE THIS INFLATOR. FAILURE TO FOLLOW WARNINGS AND COMPLY WITH
ALL INSTRUCTIONS COULD RESULT IN FIRE, PROPERTY DAMAGE OR INJURY TO
PERSONS.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION.
OPERATE INFLATOR WITH 15 AMP 12 VOLT DC CIGARETTE LIGHTER SOCKETS
OR 12 VOLT POWER OUTLETS ONLY. DO NOT USE WITH OLDER 8 AMP CIGA-
RETTE LIGHTER RECEPTACLES.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read The Operator's Manual
Eye Protection
Wet Conditions Alert
Hot Surface
TABLE OF CONTENTS

INTRODUCTION

NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injury or damage, avoid contact with any
hot surface.
____________________________ 5
DESIGNATION/EXPLANATION
2
7059761