Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The inflator fails to run with the inflator power switch turned on:
•
Check that the plug is fully inserted into 12 Volt cigarette lighter socket. See operation
instructions on pages 5-6.
•
Your vehicle may require the ignition be turned to the accessory position for the ciga-
rette lighter to have power. The inflator should be used with the vehicle running.
•
Check to see if the fuse in the 12 Volt lighter plug has blown. See fuse replacement
instructions in the maintenance section. See figure 3, page 6 .
12 Volt power cord gets hot:
•
Make certain power cord is not coiled up or in a knot or damaged.
Pressure gauge appears to read incorrectly:
•
Make certain when you attach the air hose nozzle to the tire stem that the gauge is
reading the current tire pressure before turning on the inflator switch.
•
Wait 5-7 seconds for gauge to display proper pressure.
The inflator is running but the tire is not inflating:
•
Turn off inflator and check that the air hose nozzle is securely attached to the tire valve
stem.
TROUBLE SHOOTING
NOTES
7
7059761
Publicidad
Capítulos
Tabla de contenido
