Product Overview - Hach FL900 Serie Manual Básico Del Usuario

Single Modular Approval. Power output listed is conducted. This device is approved for mobile and
fixed use with respect to RF exposure compliance, and may only be marketed to OEM installers. The
antenna(s) used for this transmitter, as described in this filing, must be installed to provide a
separation distance of at least 20 cm from all persons. Installers and end-users must be provided
with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna
gain/cable loss: 6.63 dBi for 700 MHz & 850 MHz; 6.00 dBi for 1700 MHz; 8.51 dBi for 1900 MHz.
FCC rule parts
24, 27
Cellular Modem MTSMC-LVW3—FCC Grant Notes & Conditions :
Single Modular Approval. Power output listed is conducted. This device is approved for mobile and
fixed use with respect to RF exposure compliance, and may only be marketed to OEM installers. The
antenna(s) used for this transmitter, as described in this filing, must be installed to provide a
separation distance of at least 20 cm from all persons. Installers and end-users must be provided
with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna
gain/cable loss: 6.94 dBi for 700 MHz; 6.00 dBi for 1700 MHz; 9.01 dBi for 1900 MHz.

Product overview

The FL900 series flow loggers are used in open-channel flow monitoring studies such as inflow &
infiltration (I&I), combined sewer overflow (CSO), capacity and planning and storm water runoff
monitoring.
Data is collected from attached sensors and logged for future retrieval. The sensors can be added or
changed in the field. Depending on the model, up to four sensors can be connected. The data can be
retrieved directly through a USB or RS232 cable or remotely through a wireless network with
FSDATA Desktop and FSDATA server software. The FL900 Series loggers can also connect to an
external power source, rain gauge or be used to pace a Sigma or Hach sampler.
The wireless option and the number of available connectors varies with the model of the logger.
Refer to Figure 1 and
Figure 1 Connectors—side 1
1 Sensor (all models)
2 Sensor (FL902, FL904 only)
8 English
Table 2 Cellular Modem: MTSMC-LVW3
Frequency bands (MHz)
700 (B13), 1700 (B4), 1900 (B2)
Figure 2.
Maximum output power (Watts)
3 Computer—USB or RS232 cable (all models)
4 Auxiliary—external power or sampler (all but FL900)
0.219