Metra 99-7635 Instrucciones De Instalación página 6

ISO DDIN radio provision
1. Attach the radio brackets to the radio
housing. The following step will secure
the brackets in place. (Figure A)
2. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Secure the radio assembly to the dash
using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.
6
KIT ASSEMBLY
(Figure A)
(Figure B)
1.800.221.0932
|
MetraOnline.com