Auto Search - Gi ST9195 Manual Del Usuario

2.2 Motor Setup
2.2.2 Setting up USALS
Select the USALS in the Motor Setup menu, and press OK key to display following menu.
 Satellite :
 Transponder :
 Satellite Position : You can edit the position of satellite.
 Longitude :
 Latitude :
 Move Coarse :
 Move Fine :
 Motor Contro l :
 Limit Setup :
- EAST LIMIT :
- WEST LIMIT :
- DELETE LIMIT :

2.3 Auto Search

12
MANUAL_GI ST9195_9196_Eng_100219 [cs4].indd 12
Select a satellite by pressing  keys.
Displaying current TP value.
Setting the longitude position.
Setting the latitude position.
Move DiSEqC1.2 motor manually. Move west (), Move east ().
Moves depending on the value of Nudge size.
GOTO, SAVE, GOTOREF.
Setting limit.
Confirming the setting of East Limit.
Confirming the setting of West Limit.
Delete the setting of East & West Limits.
All channels will be searched if the selected satellite is properly assigned in the
Antenna Setup menu.
 Search Type
- Multi Satellite :
- One Satellite :
- Multi Transponder : Search multiple TS in transponder pop-up window.
- One Transponder :
 Satellite :
 Transponder :
 NIT Search :
 Channel search Type :
Search multiple satellites as you select in pop-up
window.
Search only the current satellite.
Search current transponder.
Select one of Satellite.
(Select satellite in the auto search menu and press
RED key to Multi Satellite Register)
Select one of transponders in TP list.
Activate network search mode.
Select one of search Type between "ALL", "FTA",
"Scramble", "All TV", "FTA TV", "RADIO", "Scramble TV",
"All RADIO", "FTA RADIO", "Scramble RADIO".
2010-03-17 오후 6:33:31