Event Timer - Gi ST9195 Manual Del Usuario

3.1 Channel Control

3.2 Event Timer

Set the STB work in reservation mode to Wake up and Sleep using Timer.
16
MANUAL_GI ST9195_9196_Eng_100219 [cs4].indd 16
3.1.7 Edit PID
Edit Video PID, Audio PID, PCR PID with Hex or decimal code.
If you want to change PID number, press RED key to Enter value by yourself.
3.1.8 Move
Change the position of the selected channel in the channel list.
Select MOVE in the edit channel popup menu, Press OK on the channel that you
want to move, use press UP/DOWN key to locate channel position and RED
(move channel) key and then Press EXIT key to save.
3.1.9 Delete
Delete the selected channel or TP.
Select delete in the edit channel popup menu, press OK on the channel that you
want to delete, and RED(delete channel) key or Yellow (delete all)
Add the event in the list by the Green key, and edit the selected event in the list
by the Red key.
To delete the event, press the Yellow key.
Ch View : Set the watching channel for turn ON/OFF time, cycle, etc.
Wakeup : STB will be automatically powered on by setting of Wakeup time.
Sleep : STB will be automatically powered off by setting of Sleep time.
Record : Record the reserved channel.
2010-03-17 오후 6:33:33