Product Familiarisation; Intended Use - Silverline 2000W Hot Air Gun Manual Del Usuario

127655
f) If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your finger
on the switch or energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related hazards.
Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect
the power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Hot Air Gun Safety
• Never allow any air vents to become blocked, or allow vents to be
obscured during use.
• Obscured inlet or outlet vents will cause the tool to rapidly overheat.
• Parts of this tool will become extremely hot during use. Do not touch any
part of the tool, other than the handle whilst in use.
• Always switch off, and allow to cool fully before handling, or attempting
to change any fittings. Do not leave this tool unattended whilst hot.
• Heat may be conducted to hidden areas, or materials near to the work
area. Ensure that there are no flammable materials in the vicinity of the
work area.
• Never aim the hot air gun towards people, or animals.
• Do not hold the outlet nozzle against any material.
• Always keep the outlet nozzle at least 25mm away from the work
surface. Do not allow any object to enter the nozzle when the tool is
connected to the power supply.
• Do not allow paint, or any other waste, to accumulate on the outlet nozzle
or scrapers. Residual heat may cause waste material to ignite, even after
the tool has been switched off.
• When working on a vertical surface, always aim the heat gun downwards
to prevent debris from falling into the machine.
• Use of the hot air gun on certain materials may result in toxic fumes
being emitted. Always allow adequate ventilation. Do not use in confined
spaces.
• A good quality breathing mask, or respirator, should always be worn
when using this tool.
• If working on pre-1960 paint finishes, there is an increased chance of
encountering lead based paint.
• Lead is especially toxic to children, pregnant women, or people with high
blood pressure. If working on pre-1960 paint finishes such people should
not be allowed near to the work area, even if provided with appropriate
breathing protection.
• This tool should never be used in conjunction with chemical paint or
varnish strippers. Use of heat guns with chemical strippers can produce
extremely harmful fumes.
• Never use this tool near to any kind of fuel tank or gas cylinder.
• Always dispose of waste material responsibly.

Product Familiarisation

1 Outlet nozzle
2 Inlet vents
3 On/Off switch
4 Accessory nozzles

Intended Use

Hand-held electric hot air blower for domestic light to medium duty
applications. Suitable for stripping of paint and other surface coatings,
curing new paint or filler, shrinking heat-shrink tubing and shrink-wrap,
pre-heating and drying applications, thawing frozen water pipes and other
DIY applications.
Unpacking and Assembling your
Hot Air Gun
• Carefully unpack and inspect the hot air gun. Fully familiarise yourself
with all features and functions of the tool.
• If any parts are damaged or missing, have these parts repaired or
replaced before use.
www.silverlinetools.com
2000W Hot Air Gun
5