Installation; Rack Mounting - Toa WD-5800 Manual De Instrucciones

7. INSTALLATION

7.1. Rack Mounting

Use an optional MB-15B bracket when mounting the unit in an equipment rack.
Step 1. Using the screws supplied with the MB-15B, mount the MB-15B to the unit's sides.
Step 2. Using other screws also supplied with the MB-15B, mount the unit in the rack.
Fiber washer for M5
(supplied with MB-15B)
Tapping screw 5 x 12
(supplied with MB-15B)
7.2. Installing the Unit on the Desk
When installing the unit on the desk, attach the supplied rubber feet to the unit's bottom surface.
Rubber foot (accessory)
Mounting bracket MB-15B
(option)
Tapping screw 3 x 14
(supplied with MB-15B)
Attach over a hole.
Rack
7