Specification - Toa WD-5800 Manual De Instrucciones

8. SPECIFICATION

Power Source
Power Consumption
Current Consumption
Frequency Range
Antenna Input
Antenna Output
DC Power Supply
Indicator
Operating Temperature
Operating Humidity
Finish
Dimensions
Weight
Note:
The design and specifi cations are subject to change without notice for improvement.
• Accessories
AC adapter ............................................................. 1
Power cord (2 m or 6.56 ft) .................................... 1
DC cable ................................................................. 4
Rubber foot ............................................................. 4
• Optional product
Rack mounting bracket: MB-15B
8
AC mains (supplied AC adapter must be used)
25 W or less
1.6 A (12–15 V DC)
VHF/UHF
2 inputs per distribution channel (front x 1, rear x 1),
75 Ω, BNC (phantom power for antenna)
4 outputs per distribution channel, 75 Ω, BNC
4 outputs (each output: 12 V DC/250 mA)
(Output voltage of this unit depends on that of AC adapters.)
Power lamp
–10 to +50 °C (14 to 122 °F)
30 to 85%RH (no condensation)
Panel: Aluminum, black, paint
Case: Steel, black, paint
420 (w) x 44 (h) x 214 (d) mm (16.54" x 1.73" x 8.43")
2 kg (4.41 lb)