Specifications - Curtis Dyna-Fog 2790 Manual Del Usaurio

TM
The Hurricane machine is an electric "Cold Fog" ULV/Mister with three rugged
nylon nozzles. This device is intended for applications of both oil bases (following
necessary precautions) and water based chemical treatments including wettable
powders and wet flowables. The body and tank are made of high-density chemical
resistant polyethylene. The applicator is useful for dispensing most chemicals which
are labeled for aerosol or mist applications such a disinfectants, deodorizers,
germicides, insecticides, etc., in locations such hospitals, schools, nursing homes,
greenhouses, stables, warehouses, homes, and farm buildings. The particle sizes
generated range from 7 to 30 microns VMD, depending on the flow rate and
viscosity of the materials.
MODEL 2790 HURRICANE
MODEL 2792 HURRICANE
MODEL 2738 HURRICANE
MODEL 2739 HURRICANE
MOTOR:
2790 CONTINUOUS DUTY
110-130 VOLTS AC
6.85 AMPS
50/60 HZ
20,000 RPM
MAX OUTPUT 5 GAL/HOUR
(19 L/HOUR), ADJUSTABLE
W=8 INCHES
(20.3 CM)
WEIGHT
(EMPTY)
6.4 LB
(2.9 KG)
Cord Type SJ60,18" (46 cm) length; optional 25 Ft (7.6 m) extension cord available.

SPECIFICATIONS

TM
110-130 VAC
TM
210-250 VAC
TM
W/FLOAT VALVE, 110-130 VAC
TM
W/FLOAT VALVE, 210-250 VAC
2792 CONTINUOUS DUTY
210-250 VOLTS AC
3.4 AMPS
50/60 HZ
20,000 RPM
1 GAL (3.8 L)
TANK CAPACITY
L=13 INCHES
(33 CM)
- Page 1 -
H=14 INCHES
(35.6 CM)