Getting Started; System Specifications - XtremeMac TANGO BLC Guia Del Usuario

Getting Started

1. Remove unit, AC adapter and remote from the
box and properly dispose of any plastic or foam
packaging material.
2. Place unit on a level surface close to a power
outlet following the precautions listed in the
safety warnings.
3. Connect the AC adapter plug to the back of the
unit where it is labeled 18V 2.5A and then connect
the other end of the adapter to a power outlet.

System Specifications:

Total Power ............................................................. 30W RMS
Line-in Sensitivity ............................................ 500mV RMS
Bass Control@100Hz ................................................ +/- 8dB
Treble Control@10kHz ............................................. +/- 8dB
SNR .................................................................................... >80dB
Unit Dimensions .... 13.75"w x 4.25"d x 5.90" h Speaker
Speaker Specifications
• Dual 2.75" ported drivers
• Dual 1.4" dome tweeters
• Downward firing subwoofer 3.5"
Controlled material extracted from Matrix on Jul 1, 2013 04:12:00 AM CDT
7