Troubleshooting - Waring Commercial WCV300 Manual De Instrucciones

Fig. 1

TROUBLESHOOTING

WCV300 will not turn on –
• Make sure that the machine is properly plugged into a grounded
outlet.
• Check the power cord for tears and frays. Do not use machine
if power cord is damaged.
• Make sure the power switch is turned on. LED screen will be
illuminated when on.
• If you see nothing displayed on the LED screen and the machine
will not function, make sure the lid is open and turn the power off.
Turning the machine back on should return it to working order.
WCV300 does not pull a complete vacuum with pouch –
• Vacuum Time may not be set high enough. Set Vacuum Time
higher and vacuum again.
• To vacuum and seal properly, the opening of pouch must be within
the vacuum chamber. For detailed instructions, refer to "Operating
Instructions." See page 8.
• WCV300 seal bar, lid gasket and vacuum pouch need to be clean,
dry and free of debris for the vacuum process to be successful.
Wipe surface of seal bar, lid gasket and inside of pouch and
try again.
Fig. 3
Fig. 2
13