Charging The Battery - Billow SS00HD Manual Del Usaurio

EN
Installing the SIM card, memory card and battery
Before using your phone, install the SIM card.
The SIM tray is located at the top of the housing of the phone
battery. Remove the housing by pulling from the bottom right
slot up.
Correctly insert the standard SIM card in the SIM A slot on the left.
In the same slot, install the Micro MD Memory card (up to 32 GB).
The housing of the Micro SD card is under the SIM A.
On the right is the SIM B slot for Micro SIM card usage. Correctly
insert the Micro SIM card.
Insert the battery carefully, taking into account the direction of
the pins and battery orientation.

Charging the battery

This phone uses a rechargeable battery.
For a first use fully charge the battery for at least 6h.
With normal use of the device, the battery indicator will warn you
when the battery is low. Proceed to load. Plug the charger into a
free power outlet and the end of the micro USB cable in the Micro
USB port of the phone. The charging indicator is displayed on the
screen and indicates the phone is charging.
After the charge is complete, disconnect the charger from the
phone. CAUTION : The phone battery must not be removed