Safety Precautions; Technical Data; Charging Procedure - Carson Expert Charger GP Manual De Instrucciones

SAFETY PRECAUTIONS

Please follow below safety notes otherwise the charger and the
battery can be damaged violently.
• Do not keep it in an environment below 5°C or above 50°C.
• Keep away the charger from dust, damp, rain, heat, direct suns-
hine and vibration. Do not drop it.
• This charger should be used on a heatresistant, nonflammable
and nonconductive surface. Never place it on a car seat, carpet
or similar.
• Do not apply the voltage & current higher than the require-
ments by the manufacturer of the battery.

TECHNICAL DATA

500606083 500 mA charger:
Input voltage: 110-240V 50/60 Hz
OUTPUT 1 (GLOW PLUG):
Type of battery: NiMH
Number of cells: 1 cell
Output voltage: 1,4 V
Power output: 0,7 W
Maximum charging current: 500 mA
Automatic cut-off: yes
OUTPUT 2 (RX BATTERY PACK):
Type of battery: NiMH
Number of cells: 4/5 cells
Output voltage: 5,6-7 V
Power output: 3,5 W
Maximum charging current: 500 mA
Automatic cut-off: yes

Charging procedure

• Connect battery to plug, pay attention to the connector shape,
do not apply force.
• Insert the connector in the power outlet, LED will light up red:
the battery is charging.
• Charging time depends on the battery capacity
GB // 6
• Double check if the battery count and type match your charger
settings.
• Never disassemble or alter the charger.
• Do not attempt to charge/discharge nonrechargeable batteries
or damaged batteries with the charger.
• Keep the charger far away from children. Never leave the char-
ger unsupervised, when it is connected to its power supply.
• LED will light up green, battery is fully charged.
• Charger goes on to trickle charge pulsating at 0,1A.
• Disconnect battery from charge connector and leave to cool
down.