MoJack 750 XT Instrucciones Para Asamblea Y De La Operación página 15

STEP 12
Raising the Mower
• Raise the mower by rotating the Crank Handle clockwise.
• See Step 22 for raising the mower with drill attachment.
Do not attempt to lift more than 750 lbs.
The MoJack 750XT must be used on a solid level surface.
The engine must be turned off and key removed.
The mower must be in neutral.
Disengage transmission if neccessary.
The parking brake must be off during this step.
The Safety Straps must be firmly tightened.
STEP 13
Raising Lift Arm to Locking Position
• Raise the Lift Arm until the Carrier Locking Pin drops into the
Safety Hole.
• The Carrier Locking Pin automatically drops into the Safety Holes as
the Carrier passes the Safety Holes on the Tower when raising.
• Note: When lowering the Lift Arm, the Carrier Locking Pin
must be held out by the operator until it clears the bottom
Safety Hole.
STEP 14
Preparing the Mower for Service
• Place wheel chocks (not included) behind the back tires of the mower.
• Now apply the parking brake on the mower.
• The Carrier Locking Pin must be locked into one of the two
Safety Holes.
MoJack 750XT Lift
Operating Instructions
15
Wheel Chock
Carrier
Locking
Pin
Pull Out
to
Unlock
and
Lower
Safety Hole