UTC Fire & Security Interlogix TruVision TVC-BIR6-SR Guía De Bolsillo página 9

EN
Overview
This is the TruVision Bullet IR Camera Pocket
Guide for model TVC-BIR6-SR(-P). This guide
describes a standard installation.
The camera consists of the following:
 Camera with power and video output cables
 Sunshield
 Mounting bracket
Refer to the figures on pages 3 and 5 when
performing the camera setup procedures.
Installation
To install the camera:
1. Using the mount as a template, place it level
against the mounting surface and mark the
position of the mounting holes.
2. Following all local codes, drill and prepare the
mounting holes.
7 EN