Vasner StandLine 25R Manual De Instrucciones página 21

Component parts
(1) Appliance body
(2) Power cable
(3) Pedestal base front plate
(4) Pedestal base rear plate
(5) Power cable fixture
(6) Screws for fixing power cable
(7) Screws for fixing the base plate
(8) Function Button / Display / ON / OFF
(9) Protective grid
(10) Carbon Infrared Heating Tube
Mounting the StandLine 25R
• First of all, please place the power cable between both plates of the base
• Then plug together the two base plates with an accurate fit. The cable leads
now through the base plate through the center hole
• Now position the StandLine on the base plate and fix it from the bottom
with the two ring washers and screws
• Lead the power cable between the slots and recesses and fix it with the
cable fixture and the two small screws
• Please set a battery into the remote control. (not included)
• The VASNER StandLine is now ready to use.
GB
VASNER
21