Connecting Power To The Fan - Dometic CCF-T Manual De Instalacion Y Uso

Installation
11 Engaging the Receptacle Locks
Receptacle Locks (2)
q
5. Continue to lower the refrigerator unit until it is fully
seated with the receptacle locks engaged. The top
edges of both the refrigerator unit and the console
bin should be level.
10
q
w
Console Bin
w

7 .4 Connecting Power to the Fan

e
q
12 Connecting the Front Fan
Front Fan
q
Fan Power Plug
w
1. Remove the temporary tape holding the black fan
wire in place.
2. Locate the fan power plug below the USB port.
3. Routing the black fan wire away from the fan blades,
connect it to the fan power plug.
4. Gently push the connected fan wires back into the
opening, protecting the wires from the fan blades.
5. Start the vehicle engine.
6. Press and hold the ON/OFF button for one second
to turn the refrigerator unit on and to listen for the
condenser fan to start. See "Troubleshooting" on
page 13 if the condenser fan does not start.
7. Press and hold the ON/OFF button for one second
to turn the refrigerator unit OFF.
8. Turn the vehicle engine OFF.
CCF-T Refrigerator
w
q
Black Fan Wire
e
EN