How To Use The Baby Monitor - Philips SBC SC363 Modo De Empleo

Monitoring baby's sounds
To use the units to listen to your baby:
• Position the Baby unit at least 1 metre away from the baby so that the microphone (A-1) can pick up
baby's sounds.
• Set the channel switch to the same position on both units.
• Push the POWER switch on the baby unit (A-4) to switch it on.
• Set the SENSITIVITY control (A-5) on the Baby unit to about mid-range (5).
• The green TRANSMIT light (A-3) lights when a sound is picked up.
• Move away from the Baby unit with the Parent unit.
• Switch on the Parent unit using the Volume control/Off (B-3) and adjust the volume to the level you
prefer.
• If required, re-adjust the SENSITIVITY control (A-5) on the Baby unit to set the level at which the
microphone will start to pick up sounds.
When the SENSITIVITY control (A-5) is set to 9, the microphone picks up even the softest sounds.
Experiment with different levels until you find the setting that suits you and your baby best.
H
OW TO USE THE BABY MONITOR
4