Safety And General Information - Omega Lift Equipment 92450 Manual De Instrucciones

SAFETY AnD gEnERAL InFORMATIOn

For your safety, read, understand, and follow the information provided with and on this folding creeper. The owner
and operator shall have an understanding of this product and safe operating procedures before attempting to use.
The owner and operator shall be aware that use of this product may require special skills and knowledge. Instructions
and safety information shall be conveyed in the operator's native language before use of this product is authorized.
Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of
the product. If any doubt exists as to the safe and proper use of this product, remove from service immediately.
Inspect before each use. Do not use if there are broken, bent, cracked or damaged parts (including labels). Any
folding creeper that appears damaged in any way, or operates abnormally shall be removed from service immediately.
If the folding creeper has been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until it has been inspected by an Omega authorized service center. It is recommended that an annual
inspection be done by qualified personnel. Labels and Operator's Manuals are available from manufacturer.
PRODUCT DESCRIPTIOn - MODEL 92450
This device is designed to support and transport, along a smooth and level surface, one person, tools, and equipment
weighing *450 lbs. or less for the purpose of performing automotive maintenance or service. This device is not
intended, designed or engineered to be used for any other purpose.
Rated Capacity: One (1) person weighing 450 lbs. or less- * includes person, tools, equipment, personal items
SPECIFICATIOnS
Model Rated Capacity
92450
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and Figure 1 illustration. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Package Contents List
Item Description
A Tool Box Sub-Assembly
B Caster Fasteners
C Rear Tool Tray
D Flat Washer
E Swivel Caster
F Front Frame Section
G #2 Philips Screw
H Front Tool Tray
J Hexhead-Philips Screwdriver Tool
Overall Toolbox Dimension
450 lbs 18-1/4" x 14-1/8" x 18-7/8"
(L x w x H)
Qty
1
4
1
2
H
4
1
2
F
1
1
2
Tool Drawer Inner Dimension
(L x w x H)
12-3/4" x 8-7/8" x 1-3/8"
A
J
D
G
E
Figure 1 - Assembly
B
C