C - Location Of The Remote Control; Use Of The Appliance; A - Auto Mode (Automatic); B - Cool / Heat / Fan Mode - Olimpia splendid Ci2 Wall Instrucciones Para Uso Y Mantenimiento

• If the remote control is not used for several weeks or longer, remove the batteries.
Any leaks from the batteries could damage the remote control.
Do not re-charge or disassemble the batteries. Do not throw the batteries into the fire.
They can burn and explode.
If the battery liquid falls onto the skin or clothes, wash well with clean water. Do
not use the remote control with batteries that have leaked.
The chemical products contained in the batteries can cause burns or other risks
to health.

3.4.c - Location of the remote control

• Keep the remote control in a position from which the signal can reach the receiver (4) of the appliance
(maximum distance is approx. 8 metres - with charged batteries) (figure 6).
The presence of obstacles (furniture, curtains, walls, etc.) between the remote control and the appliance
reduces the remote control range.

3.5 - USE OF THE APPLIANCE

3.5.a - AUTO mode (Automatic)

When the appliance is switched on, the operating LED (5) on the unit flashes.
a. Press the MODE key (P1) to select AUTO mode.
b. Adjust the temperature with the ▲ and ▼ keys. The adjustment range is 17°C~30°C.
c. By pressing the ON/OFF key (P5), LED (5) of the appliance switches on. The appliance operates in AUTO
mode and the fan speed is set at AUTO, without the possibility of adjustment.
d. In AUTO mode, the ECO function is also active.

3.5.b - COOL / HEAT / FAN mode

a. Press the MODE key (P1) to select the "COOL, HEAT or FAN mode.
b. Adjust the temperature with the ▲ and ▼ keys. The adjustment range is 17°C~30°C.
c. Press the FAN SPEED key (P2) to select the
AUTO (automatic) > LOW > MED (medium) > HIGH option > ...
d. By pressing the ON/OFF key (P5), LED (5) of the appliance switches on. The appliance functions in the
way set.
d. Interrupt operation using the ON/OFF key (P5).
In ventilation mode, the temperature cannot be adjusted and the ECO function is not active.
Therefore, passage 2 is omitted.
EN - 17