Clatronic AR 819 BT/USB/Card Manual Del Usaurio página 37

OPERATION
Searching Directory or File Name
Press AS/PS (D-AUD) button (20) for
two times. It enters into "Searching
Directory or File Name" in Digital Audio
CD.
The unit searches files and directories
that have the same character which is
inputted by the user pressing the
corresponding buttons listed on the
Table 1 below.
Explain as follows:
- Use the corresponding buttons to
select the characters A to Z, blank, 0
to 9, _, -, +.
- Press SEL button (26) to confirm
entry of each characters.
- Press BND/LOU/ENT button (24)
to start the title search.
In case the selected title is a
directory name, display will show (' '),
then
- Use the
UP/DOWN buttons to list all songs
under this directory and select the
title.
- Press BND/LOU/ENT
confirm and start the play.
- Repeat the above steps if the newly
selected title is again a directory.
Searching From Root Directory
Press AS/PS (D-AUD) button (20) for
three times. The unit searches fire or
directory from root by
TUNE/SEEK/TRACK UP/DOWN buttons.
(D-DIR icon turns on if the name is
directory). Display will list all available
directories and songs. Select the
desired directory/songs by using
TUNE/SEEK/TRACK UP/DOWN buttons
and BND/LOU/ENT button to confirm. If
the selected title is a song, it starts to
play.
If the selected title is a directory name,
display will show (' '), then
- Use the TUNE/SEEK/TRACK
TUNE/SEEK/TRACK
button
UP/DOWN buttons to list all songs
under this directory and select the
title.
- Press
confirm and start the play.
- Repeat the above steps if the newly
selected title is again a directory.
Searching From Current Directory
Press AS/PS (D-AUD) button for four
times. The unit searches fire or directory
from
TUNE/SEEK/TRACK UP/DOWN buttons.
(D-DIR icon turns on if the name is
directory). The current directory name is
displayed for a
second and the currently playing file
name is displayed (selected). The user
can select the directory or file in the
directory
UP/DOWN buttons. The selected file can
be played by pressing BND/LOU
(ENT) button.
3) DISPLAY ID3 INFORMATION
Press ID3 button (20) to show the ID3
TAG (if available: song title, directory
to
name, artist name, other contents...)
(FOR WITH MP3 ID3 FUNCTION
VERSION ONLY).
SUPPORT MP3/WMA DECODING MODE
The main
(Windows Media Audio) decoding modes
as below.
Standard
MPEG1 Audio
Layer 3
(44.1kHz)
Windows
Media Audio
(44.1kHz)
The USB solution can support:
1. Folder: 500 max.
2. File: 999 max.
36
BND/LOU/ENT
current directory
by TUNE/SEEK/TRACK
unit supports
Bit Rate
(kbps)
32,48,64,96, Stereo
128,192,256,
320
64,96,128,192 Stereo
button to
by
MP3/WMA
Supports
Mode