Bluetooth Operation; Preparing For Operation; Pairing; Connect - Clatronic AR 819 BT/USB/Card Manual Del Usaurio

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

OPERATION
SHF
When playing a song, press SHF button (9)
shortly, after the current song play to the
end, will play the songs in current category
in random order, and "Shuffle" will appear
on the display. Press it for about 2 seconds
will play all songs in the album and
"F-Shuffle" will appear on the display. In the
Song or Album shuffle mode, press SHF
button again, will exit shuffle mode.
TUNE/TRACK UP/DOWN
When playing a song, press
(1) will play the previous/next track in the
current category, but you can not enter to
the next category.
When playing a song more than 1 second,
press
will play the song from the start
position.
When playing a song less than 1 second,
press
will play the previous track.
When playing a song, press ad hold
button (1) for more several seconds will fast
reverse/ forward of the playing. And the
display will show the playing time (e.g.
0'00).

BLUETOOTH OPERATION

PREPAIR
OPERATION
(i) When use Bluetooth, please make
sure the mobile phone supports
Bluetooth function.
(ii)
For the different kind of mobile
phone, Bluetooth emissive power has
some difference. To get the best
conversation quality, it is commended
that the distance between the mobile
phone and the unit is within 3m. And
please don't put any metal object or
any obstacle between the path of the
mobile phone and the unit.
button
/
FOR
BLUETOOTH

PAIRING

1) In any mode, press and hold
PAIR(MOD) button (5) on the front
panel, "Pairing......" will appear on the
LCD.
2) On the mobile phone, select the
Bluetooth set up. (Please refer to the
instruction manual of your mobile
phone on how to operate Bluetooth.)
3) "CARBT_V04.00.1" should appear in
the list on your mobile phone, please
select "CARBT _V04.00.1" and then
input password "0000" .
4) When successful paired, "CONN
OK!" will be displayed on LCD.
5) When pairing failed, "END" will be
displayed on LCD. You can press and
hold PAIR button (10) again to try the
pairing again.
6) During Pairing, only
/
/
MUTE button (14) are functional,
other keys are disabled during
pairing mode.
When pairing, you can press PAIR
button (5) to terminate the pairing.

CONNECT

This unit is built-in auto-reconnection
function. Every time when you short
press
reconnect with the mobile phone (note:
the mobile phone must have been
paired with the unit before.).
In the following conditions you can
reconnect manually
RECON
seconds, when reconnect is successful
"Conn OK!" will be displayed.
1) If the mobile phone is out of range,
the connection will be lost, when you
38
(volume up/down) (25) and
button (4), the unit will auto
by pressing
button
(19)
for
button (2),
several

Publicidad

Tabla de contenido
loading

Tabla de contenido