Soil Sensor Menu; Navigating The Menu Interface; Cal Setting; Getting To The Sensors Menu - Toro EVOLUTION Serie Manual De Instrucciones

calibration will be set using the next sensor reading
(within 30 minutes).
Additional calibration settings are available. From '1' (~1
day "watch window") to '168' (~7 day "watch window").
ADD/REMOVE DEVICE

CAL SETTING

CALIBRATE NOW?
4. Move to the YES field after CALIBRATE NOW?
Press . Sensor calibration begins.
5. Press to return to the Home screen. A message on the
bottom of the Home screen indicates that the sensor is
calibrating. The message clears when calibration is finished.
11:18AM
SCHEDULE A
NOT WATERING TODAY
SOIL 1 CALIBRATING
5
YES
HOME
TUE
10/29
The Soil Sensor Menu
The EVOLUTION® controller's Soil Sensor menu displays
sensor information as well as allows the user to modify certain
settings.

Navigating the Menu Interface

• Use or to navigate the menu commands.
• To change a value, press
field, then press and
• Press to input the desired value.

Getting to the Sensors Menu

ADVANCED then
1. Press
to SENSORS. Press
2. Press
ADVANCED
ZONE RUNTIMES
ZONE DETAILS
SCHEDULE STARTS
SCHEDULE DETAILS
SENSORS
or to move to the desired
to adjust the value.
.
.
7