Safety Labels; Important; Operating Precautions - Shindaiwa M242/EVC Manual Del Operador

Safety Labels

Figure 1

Operating Precautions

CAUTION!
Never extend trimming line beyond the
length specified for your unit. Always
keep the unit as clean as practical. Keep
it free of loose vegetation, mud, etc.
4
This label indicates the
minimum distance between
front handle and rear grip
per ANSI B175.3.
 Always make sure the cutting at-
tachment tool is properly installed
and firmly tightened before opera-
tion.
 Never use a cracked or warped
cutting attachment: replace it with
a serviceable one and make sure it
fits properly.
 Keep the unit away from excessive
heat. Engine fuel is very flammable
and fire could lead to serious per-
sonal injury or property damage.
 Make sure there are no missing or
loose fasteners, and that the stop
switch and throttle controls are
working properly.
M242

IMPORTANT!

Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
WARNING!
 Before starting the engine, make
sure the cutting attachment is not
contacting anything.
 Always stop the engine immedi-
ately and check for damage if you
strike a foreign object or if the unit
becomes tangled. Do not operate
with broken or damaged equip-
ment.
 Never transport the unit or set it
down with the engine running. An
engine that's running could be
accidently accelerated causing the
cutting attachment to rotate.
 Make sure cutter safety guards are
in place when transporting the unit.