Symmons Unity 6603 Manual De Funcionamiento Y Mantenimiento página 4

Installation
Note:
For valve body installation, please
see valve body manual.
1) Install mounting plate (F) to
shower valve. Secure with two
screws (E).
F
E
2) Attach shower escutcheon (D) to
mounting plate (F).
D
F
Note: Tabs should snap into place.
3) Install dome cover (C) to valve by
turning clockwise.
C
4) Install handle (A) to valve and
secure with set screw (B).
A
B
Note: Handle should be facing the
6 o'clock position.
5) Install tub spout (O) to pipe fitting.
Turn clockwise to secure.
O
6) Install wall ell (K) to pipe fitting.
Tighten set screw (L) to secure.
K
L
4
7) Place mounting plate (J) in po-
sition, mark and drill 3/16" holes
for tile anchors (J1), 5/16" holes
for drywall anchors (J2). Install
anchors.
J1
J2
2
Note: For dry wall 1/2" thick or less,
insert anchor tool (J3) into drywall
anchor (J2) to secure behind wall
prior to installing wall cradle.
8) Remove cover of hand shower
cradle (H). Install cradle and
mounting plate (J). Secure with
three screws (I). Replace cover
on hand shower cradle.
I
2
J
J2
J3
H
J