Getting Started; Package Contents - Watchguard Firebox Peak X8000 Guía De Inicio Rápida

Getting Started

Firebox®X Peak™ has the security you really need. A fully integrated appliance, it contains
powerful layered network security, intuitive management and premium support through
LiveSecurity®Service. This QuickStart Guide covers the initial installation of Firebox X Peak. Refer
to your Hardware Guide and WatchGuard® System Manager User Guide for hardware specifications
and comprehensive setup instructions.
Navigation Buttons

Package Contents

✔
Firebox X Peak appliance
✔
QuickStart Guide
✔
User documentation
✔
Three straight-thru Ethernet cables (green)
✔
One Cross-over Ethernet cable (red)
✔
One Serial cable (blue)
✔
Rack-mounting kit
✔
WatchGuard System Manager CD-ROM
✔
License key certificate
✔
LiveSecurity Service activation card
✔
Warranty card
1
Registering with LiveSecurity
You must activate this product and get a Feature Key to enable the device.
1. Log on to http://www.watchguard.com/activate
2. Follow the onscreen instructions.
3. Download the Feature Key for the product you are registering.
LiveSecurity Service
Username
Password
LCD Display
Power Light Netw ork
Console Trusted Interface
Steps for Installation
Registering with LiveSecurity ® Service
■
Gathering network information
■
Setting up the management station
■
Cabling the Firebox X Peak
■
Using the Quick Setup Wizard
■
Deploying the Firebox X Peak into your network
■
® Service
Firebox X Peak Serial Number
Found on the back of your Firebox under the barcode.
2
Activity Lights
Network Interfaces