Quick Start-up
Installation
Unpacking the printer
Place your printer on a solid base.Make sure that the "Up" symbols point to the correct direction.
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
Open the packaging and take out the ribbon cassette. Pull the
printer out of the cardboard box towards you and remove the
remaining packaging material.
Check the printer for any visible transport damage and com-
pleteness. Apart from this Operator's Manual ( ), the CD-ROM
( , at the back of this manual), the power cable ( ), the ribbon
( ) and the paper support ( ) must be included.
If you find any transport damage or if any accessories are
missing, please contact your dealer.
Installation
S H
L I
G
E N
5