Start-Up - Powerfix Profi 10336A/ES-P06 Instrucciones De Utilización Y De Seguridad

Therefore, we recommend installing the motion detector
to the side of the direction of movement.
Note: To attach the base plate
two holes.
cable!
Remove the screws
(see Ill. B).
Insert the cable through the cable opening of the base
plate .
4
Screw the base plate
Connect the cable to the screw terminal
detector as depicted in Ill. C.
Attach the cover of the connection area back to the base
plate by screwing the screws
4

Start-up

Turn the electricity back on. The device is now ready for
use.
68 GB/MT
Ensure that you do not damage any electricity
from the front of the motion detector
2
to the desired position.
4
it is necessary to drill
4
of the motion
3
.
2
1