Silverline 282400 Manual Del Usuario página 4

GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Caution!
DO NOT use on scaffolding or ladders
Important safety devices! Ensure correct function, maintain in
accordance with instructions and DO NOT disable!
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools must not be disposed of with household waste. Air
tools may contain traces of tool oil and other lubricants and so
must be recycled accordingly
Specification
Weight ....................................... 4.2 kg
Working Pressure....................... 5 - 8 bar (75 - 115psi)
Nail Capacity ............................. 90 pieces
Nail Gauge ................................. 10 - 12 Gauge
Nail head diameter..................... 6.8-7.2mm
Nail shank diameter ................... 2.87-3.33mm
Nail Length ................................ 50-90mm
Air Inlet ......................................
Sound and vibration information:
Sound Pressure L . ................... 84.2dB(A)
PA
Sound Power L ....................... 97,2dB(A)
WA
Uncertainty K ............................. 3dB
Vibration emission value a
Uncertainty K ............................. 15.37%
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
4
⁄ " BSP
1
4
........ 4.2m/s
2
h
Nail
Specification
34°
Paper Collation
General Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust.
c) Keep children and bystanders away while operating a powered
tool. Distractions can cause you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense
when operating a powered tool. Do not use a powered tool
while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating a powered tool
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-
position when not operating the tool and make use of other safety
features which prevent unintentional starting
d) Remove any adjusting key or wrench before turning the powered
tool on. A wrench or a key left attached to a rotating part of the tool
may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly
used. Use of dust collection can reduce dust-related hazards.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary limit the length of time exposed
to vibration. Use the figures provided in the specification relating to vibration
if provided to calculate the duration and frequency of operating the tool.
The 2002/44/EC directive relating to vibration in the workplace may provide
useful information even for domestic use of tools. In the first instance of
feeling uncomfortable due to vibration STOP using the tool immediately.
6.7- 7.2mm
Ø Ø
( 0.268"- 0.28")
Ø Ø
50mm 50mm
(2") (2")
75mm
90mm
(3")
(3-1/2")
Smooth Ring
Shank Shank
2.87- 3.33mm
Ø Ø
( 0.113"- 0.131")
Ø Ø
10-12Ga