Special Features - Samsung WA45T3400 Serie Manual Del Usuario

Special features

Active Waterjet (for prewash)
NOTE
• The Active Waterjet function stops operating automatically when the washer detects the
maximum water level.
• The Active Waterjet function stops operating automatically 5 minutes after it begins. To
add more water, press Active Waterjet again to resupply water.
• If the Active Waterjet function is activated immediately after the washer turns on, the
washer will spray water for 1 second before supplying water through the Active Waterjet
outlet.
• To drain water added by the Active Waterjet function, turn the power off. Water will be
drained automatically for few minutes, and then you can turn the power on again when
the water is completely drained.
CAUTION
• Do not block the Active Waterjet outlet with hands. Water may leak outside the tub,
causing a system failure.
• Do not use the Active Waterjet to wash shoes, food, or pets.
WA3400T_DC68-03850E-01_EN.indd 39
You can use the Active Waterjet function to
hand-wash your items before you put them
in the washer.
1. Press POWER to turn on your washer.
2. Open the lid.
3. Press Active Waterjet to supply water.
4. Hand-wash the items.
5. When done, press Active Waterjet again
to stop the water.
NOTE
If you want to hand-wash while the washer
is operating, press START/PAUSE (Hold to
Start) to stop operation, and then follow
steps 1-4 above.
English 39
2020-07-07 PM 4:15:58